Click on the image to check the artwork
If you're looking for a portable industrial spot cooling air conditioner! Dongxia's Industrial Air Conditioner Mobile Equipment is a great choice, especially if you need to cool specific areas in an industrial setting. These Cooling Spot Cooler units are designed to provide targeted cooling where it's needed most, ensuring comfort and productivity in hot environments.Equipment Cooling Spot Cooler effectively provides local cooling for the equipment through the above refrigeration cycle and heat exchange process, ensuring that the equipment operates stably at a suitable temperature.
|
Power: |
220V |
|
Frequency: |
50Hz |
|
Cooling Capacity: |
9,520BTU |
|
Load Current: |
4.6A |
|
Power Consumption: |
990W |
|
Compressor: |
Sealed Rotary Type |
|
Water Storage Capacity: |
20L |
|
Refrigerant: |
R410A |
|
Refrigerant(Rated Charge): |
630g |
|
Optimum Operating Temperature: |
25~45°C(77~113°F) |
|
Size: |
W15.4" X D17.7 " X H34.7" |
|
Weight: |
93LB |
|
Package Weight: |
110LB |
|
Callout No. |
Item |
Discription |
Standard(S) / Optional(O) |
|
1 |
Water Tank |
condense-water tank, 20L capacity |
S |
|
2 |
Drain Hose |
hose for continous-water-draining option, 1500mm length |
S |
|
3 |
Self-Supported Duct |
180mm diameter, gray plastic duct that extends from |
S |
|
4 |
Self-Supported Duct |
120mm diameter, gray plastic duct that extends from |
O |
|
5 |
Duct Connector |
Y-shape duct connector, fit for 120mm diameter duct, devide cool air into 2 directions |
O |
|
6 |
Self-Supported Duct |
120mm diameter, gray plastic duct that extends from |
O |
|
7 |
Self-Supported Duct |
180mm diameter plastic duct that extends 800mm to 3000mm in length |
O |
The working principle of Equipment Cooling Spot Cooler is mainly based on heat exchange and refrigeration cycle.
First, it compresses the refrigerant into high-temperature and high-pressure gas through the compressor. This process increases the temperature and pressure of the refrigerant and increases its internal energy.
Then, the high-temperature and high-pressure refrigerant gas enters the condenser. In the condenser, the refrigerant exchanges heat with the surrounding air, dissipates heat to the environment, and the refrigerant gradually cools and condenses into a high-pressure liquid.
Then, the high-pressure liquid passes through a throttling device, such as an expansion valve. The throttling device causes the pressure of the refrigerant to drop rapidly, the liquid expands sharply, and the temperature also drops significantly, becoming a low-temperature and low-pressure refrigerant liquid.
After that, the low-temperature and low-pressure refrigerant liquid enters the evaporator. In the evaporator, the refrigerant exchanges heat with the equipment to be cooled, absorbs the heat generated by the equipment, and reduces the temperature of the equipment. At the same time, the refrigerant evaporates into a low-temperature and low-pressure gas and is sucked into the compressor again, thus forming a cycle.
In this process, fans are usually used to enhance the air flow at the condenser and evaporator to improve the heat exchange efficiency. For example, on the condenser side, the fan takes away the heat faster; on the evaporator side, the fan blows cold air to the equipment that needs to be cooled.
In addition, the control system monitors the temperature of the equipment and the operating parameters of the cooler, and automatically adjusts the operating frequency of the compressor, the speed of the fan, etc. according to the preset conditions to achieve precise temperature control and energy-saving operation.
Our Portable Industrial Spot Cooling Air Conditioners typically come with robust cooling capabilities and are built to withstand demanding conditions. They are equipped with strong fans and high-capacity compressors to deliver a significant amount of cool air. Some models even offer adjustable louvers or directional vents, allowing you to direct the airflow precisely where it's required.
One of the advantages of these Spot Cooling Air Conditioner units are their portability. They usually come with wheels or casters, making it easy to move them around as needed. This flexibility allows you to cool different areas within your industrial space without the need for permanent installations or ductwork.
In industrial and commercial environments, equipment cooling is critical. A Spot Cooler is an effective device used to provide cooling to a specific area when needed. This versatile device can be used in a variety of settings such as factories, offices, hospitals and shops.
Industrial Spot Cooling Air Conditioner has a very wide range of applications. In a factory environment, it can be used to cool equipment on the production line to ensure that the equipment is operating properly and does not overheat. In the office, Spot Cooler can provide employees with a comfortable working environment and improve work efficiency. In hospitals and medical facilities, Spot Coolers ensure the proper operation of medical equipment while providing comfortable temperatures for patients and medical staff.
http://www.dongxiacooler.com/